Pressure Calibrators

We calibrate your calibrators

Trusted traceability for your calibrators

Pressure is our passion. We offer NATA ISO/IEC 17025 pressure calibration with the lowest uncertainties over a broad pressure range. Trusted by all levels of industry and metrologists for over 30 years.

Providing traceability in pressure is something that we take seriously. If you have invested in a high quality digital pressure standard, such as high accuracy calibrator or automatic pressure controller, the calibrations performed using your device can only be as trustworthy as the traceability of its own calibration. APL is the trusted partner for providing traceability for many laboratories across the Asia-Pacific region.

Click on the images below to see our accredited capability.

Maximum Pressure
MPa (x1000 kPa)
Minimum Gauge Pressure
kPa
Minimum Absolute Pressure
kPa
Lowest Uncertainty
%

Pressure Calibrators

Having the lowest uncertainties enables us to calibrate all modern digital reference equipment, including:

  • Digital Pressure Calibrators
  • Reference Pressure Monitors
  • Automatic Pressure Controllers
  • Precision Barometers
  • Multifunction Process Calibrators
  • Calibrator Modules / Transducers
  • High Accuracy Pressure Transmitters

Automatic Pressure Controllers

Modern automatic controllers and calibrators are increasingly popular in today’s pressure laboratories, and for good reason! Rapid technology improvements are providing constantly improving control stability, speed and accuracy. APL is always keeping one step ahead so that we can calibrate even the most accurate controllers available on the market today. To make it easier and safer, and avoid the need for you to freight your bulky contoller chassis, we also have calibration sleds to handle the sensor/control modules of the following models:

  • Mensor / Wika CPC3050, CPC4000, CPC6000, CPC6050, CPC8000, CPA8001
  • Druck PACE5000 and PACE6000 Control Modules
  • Additel ADT160, ADT161, ADT155, ADT151 sensor modules for ADT76x, ADT77x, ADT78x and ADT79x controllers

Modular Pressure Calibrators

Modern modular pressure calibrators utilise digital data streams for communication between the sensor and the display device rather than relying on traditional analog electrical signals. This advancement allows for the sensor’s performance and calibration to operate independently from the display, resulting in significantly enhanced flexibility and user convenience. This also means the sensors can be sent alone for calibration, alowing you to hold on to your calibrator display and cycle sensors for calibration to avoid downtime. APL has calibration sleds and displays to support the following modular sensor models, for your convenience:

  • Fluke 700P and 750P Series
  • Druck PM620 and IDOS Series
  • Additel ADT160x and ADT161x Sensors
  • Crystal nVision Modules
  • Beamex EXT Modules
  • Mensor CPT Series
  • All models listed above under Automatic Pressure Controllers

Common models that we calibrate

Crystal XP2i

Crystal XP3i

Crystal nVision*

Crystal IS33 and IS31

Fluke 700G and 2700G

Fluke 700P and 750P Modules*

Fluke DHI RPM3 and RPM4

Fluke DHI Molbox+

Additel ADT680 and ADT680A

Additel ADT681 and ADT681A

Additel ADT685 and ADT686

Additel ADT672 and ADT673

Additel ADT601ex

Additel ADT273ex

Additel ADT160, ADT161, ADT151*

Wika CPG1500 and CPG1200

Mensor CPG2400 and DPG2400

Mensor CPG2500

Sika B2, C2, D2, E2

Keller Mano/Leo Series

ESI GS-4200 and GD-4200*

Ralston FieldLab

Druck DPI705 and DPI705E

Druck DPI80x

Druck DPI142 and DPI150

Druck IDOS Modules*

Druck PM620 Modules*

Druck DPI104

Meriam Smart Manometer

Dwyer 475 and 477 Manometer

Dwyer DPG

TEC DG-1000 and DG-700

Paroscientific, all models

This is only a brief selection of gauges that we calibrate. If your gauge is not in the list, don’t worry, just contact us with the make and model of your gauge and we will advise.

* For your convience, we can accommodate these modular sensors without needing your display device. Feel free to send the sensor alone for calibration.

Beamex MC6

Beamex MC5

Beamex MC4

Beamex MC2

Fluke 754 and Fluke 753

Fluke 741 and Fluke 743

Additel ADT223, Additel ADT226, Additel ADT227

Druck DPI620 and Druck DPI620 GenII

Fluke 729 and Fluke 729 Pro

Druck DPI610 and Druck DPI610E

Druck DPI611 and DPI612

Additel ADT273ex and ADT260ex

Fluke 725 and Fluke 726

Crystal Ametek HPC40 Series

Ametek Jofra ASC400

Can’t find your calibrator in the list? Don’t worry, this is only a brief selection of instruments that we can calibrate. Contact us with the make and model of your instrument and we will advise.

Mensor CPC3000* and CPC3050*

Mensor CPC6000* and CPC6050*

Mensor CPC4000*

Mensor CPC8000* and CPC8000-H*

Mensor CPA8001*

Druck PACE5000* and PACE6000*

Druck CM0*, CM1*, CM2* and CM3*

Fluke PM200, PM500 and PM700

Fluke 2271A and 6270A

Additel ADT773, ADT783, ADT793*

Fluke DHI PPC3, PPC4

Fluke Ruska 725x Series

Additel ADT780*

Additel ADT762, ADT761, ADT761A

Additel ADT760*

Additel ADT151, ADT155, ADT160, ADT161*

Halstrup Walcher KAL100

Halstrup Walcher KAL200

Huber TM40

Fluke DHI PPC2, PPC3, PPC4

Can’t find your calibrator in the list? Don’t worry, this is only a brief selection of instruments that we can calibrate. Contact us with the make and model of your instrument and we will advise.

* For your convience, we can accommodate these modular sensors without needing your display device. Feel free to send the sensor alone for calibration.

Ready to try APL?

Using APL is fast and easy. Our small size enables us to be responsive, agile and cost-effective. Contact us for a quote and our friendly team will respond quickly.

Request a quote